Papers
Number of the published data : 119
No. Title of presented paper Author's name etc. Journal name Volume/issue,page Date of Publication ISSN DOI URL
1 Estimation of WEEE Generated and Metal Discarded in Vietnam Considering Lifespan Transition
Shoki Kosai, Yusuke Kishita and Eiji Yamasue
Resources, Conservation & Recycling
154, 104621
2020

10.1016/j.resconrec.2019.104621

2 Applicability of Wiedemann-Franz Law to Thermal Conductivity of Molten Field’s Metal
Nobuyuki Mizuno, Shoki Kosai, Eiji Yamasue
Materials Science Forum
985, 1-9
2020



3 Anthropogenic Disturbance by Domestic Extraction of Gold Mining in Mongolia
Ganbold Enkhmunkh, Eiji Yamasue, Allesio Miatto, Hiroki Tanikawa
Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research)
75/ 6, 285-290
2019



4 An optimum treatment for waste electronic home appliance in remote area: the case of Kinmen, Taiwan
Hsintien Lin, Kenichi Nakajima, Eiji Yamasue, and Keiichi N. Ishihara
Waste Management
89, 379-385
2019

10.1016/j.wasman.2019.04.026

5 Total Material Requirement for the Global Energy Transition to 2050: A focus on transport and electricity
Takuma Watari, Benjamin C McLellan, Damien Giurco, Elsa Dominish, Eiji Yamasue, Keisuke Nansai
Resources, Conservation & Recycling
148, 91-103
2019

10.1016/j.resconrec.2019.05.015

6 Waste shipments for energy recovery as a waste treatment strategy for small islands: the case of Kinmen, Taiwan
Hsintien Lin, Eiji Yamasue, Hideyuki Okumura, and Keiichi N. Ishihara
Journal of Material Cycles and Waste Management
21/ 1, 44-56
2019

10.1007/s10163-018-0760-3

7 Recommendation to ASEAN nuclear development based on lessons learnt from the Fukushima nuclear accident
Shoki Kosai and Eiji Yamasue
Energy Policy
129, 628-635
2019



8 Structure and Catalytic Behavior of CuO-CeO2 prepared by High-Energy Ball Milling
The Luong, N., Duy Tien, N., Yamasue, E., Okumura, H., N. Ishihara, K.
Royal Society Open Science
6
2019

10.1098/rsos.181861

9 Global warming potential and total material requirement in metalproduction: Identication of changes in environmental impact throughmetal substitution
S. Kosai and E. Yamasue
Science of the Total Environment
651, 1764-1755
2019



10 持続可能な開発目標に向けた電子機器の使用年数の把握と傾向分析
山末英嗣,光斎翔貴,クラビオットジョルディ,安永玲華,グエンデュッククワン,梅田靖
日本LCA学会誌
14/ 1, 77-83
2018



11 Recycling of End-of-Life Vehicles in Small Islands: The Case of Kinmen, Taiwan
Hsintien Lin, Kenichi Nakajima, Eiji Yamasue, and Keiichi N. Ishihara
Sustainability
10/ 4377, 1-14
2018



12 Vehicle Energy Efficiency Evaluation from Well-to Wheel Lifecycle Perspective
Shoki Kosai, Masaki Nakanishi, and Eiji Yamasue
Transportation Research Part D: Transport and Environment
65, 355-367
2018

10.1016/j.trd.2018.09.011

13 Evaluating Power Reliability Dedicated for Sudden Disruptions: Its Application to Determine Capacity on the Basis of Energy Security
Shoki Kosai, Chia Kwang Tan, and Eiji Yamasue
Sustainability
10/ 6, 2059-
2018

10.3390/su10062059

14 Crystal Structures and Electronic Band Structures for Hypothetic Lithium Boron Nitride Intercalation Compounds
Jungryang Kim, Eiji Yamasue, Hideyuki Okumura, and Keiichi N. Ishihara
Journal of Alloy and Compounds
751, 324-334
2018

10.1016/j.jallcom.2018.04.092

15 食料生産における関与物質総量の枠組の提案と評価 ~国産食材のTMR係数~
山末英嗣,光斎翔貴,松八重一代,マクレランベンジャミン
日本LCA学会誌
14/ 4
2018



16 Comprehensive Analysis of External Dependency in terms of Material Criticality by Employing Total Material Requirement: Sulfuric Acid Production in Japan as a case study
Shoki Kosai, Seiji Hashimoto, Kazuyo Matsubae, Benjamin C McLellan, and Eiji Yamasue
Minerals
8/ 3, 114
2018

10.3390/min8030114

17 Data Envelopment Analysis for steel production with the use of Total Material Requirement
Akira Oyaizu, Jordi Cravioto, Ichiro Daigo and Eiji Yamasue
Matériaux et Techniques

2018



18 Cost-Security Analysis Dedicated for The Off-grid Electricity System
Shoki Kosai and Eiji Yamasue
Renewable Energy
115, 871-879
2018



19 東南アジアにおける家電製品の素材リサイクルによるTMR削減ポテンシャル評価
山末英嗣,安永玲華,ジョルディクラビオット,Tran Duc Huy, Nguyen Duc Quang
日本LCA学会誌
14/ 1
2018



20 New Photocatalyst LnOCl (Ln= Sm, Nd) and Novel Cocatalytic effect on BiOCl in Humid Environment
Hideyuki Okumura, Ken Adachi, Eiji Yamasue, and Keiichi N. Ishihara
ChemComm
53, 8854-8857
2017



21 Investigating energy literacy and its structural model for lower secondary students in Japan
Yutaka Akitsu, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
International Journal of Environmental & Science Education (IJESE)
12/ 5, 1067-1095
2017



22 Electrochemical lithium Intercalation behavior of pristine and milled hexagonal boron nitride
Jungryang Kim, Eiji Yamasue, Tetsu Ichitsubo, Hideyuki Okumura, and Keiichi N. Ishihara
Journal of Electroanalytical Chemistry
799, 263-269
2017



23 Intercalation of hexagonal boron nitride and graphite with lithium by sequential process of ball milling and heat treatment
Jungryang Kim, E. Yamasue, H. Okumura, Chishiro Michioka and Keiichi N. Ishihara
Journal of Alloys and Compounds
707, 172-177
2017

10.1016/j.jallcom.2017.01.050

24 Lifetime Analysis for Electronic Devices in Vietnam
Eiji Yamasue, Jordi Cravioto, Duc Quang Nguyen, Masahiro Oguchi, Ichiro Daigo
Procedia CIRP
61, 152-154
2017



25 Material flows from Electronic Waste: Understanding the shortages for Extended Producer Responsibility Implementation in Vietnam
Duc-Quang Nguyen, Vinh-Hung Ha, Eiji Yamasue, Trung-Hai Huynh
Procedia CIRP
61, 651-656
2017



26 Comparative analysis of average time of use of home appliances
Jordi Cravioto, Reika Yasunaga, and Eiji Yamasue
Procedia CIRP
61, 657-662
2017

10.1016/j.procir.2016.11.248

27 Quantifying the total amounts of tramp elements associated with carbon steel production in Japan
Ichiro Daigo, Leo Fujimura, Hideo Hayashi, Eiji Yamasue, Satoshi Ohta, Tran Duc Huy, Yoshikazu Goto
ISIJ International
57/ 2, 388-393
2017

10.2355/isijinternational.ISIJINT-2016-500

28 Total Material Requirement of Scrap Steel from End-of-Life Vehicles
Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Ichiro Daigo and and Keiichi N Ishihara
ISIJ International
56/ 8, 778-787
2016



29 日本の中学生のエネルギー・リテラシー調査- 知識、関心、行動の評価と日米比較 -
秋津裕,石原慶一,奥村英之,山末英嗣
エネルギー環境教育研究
10/ 2, 15-28
2016



30 Structures of Boron Nitride Intercalation Compound with Lithium synthesized by Mechanical Milling and Heat Treatment
Jungryang Kim, E. Yamasue, H. Okumura, Keiichi N. Ishihara and Chishiro Michioka
Journal of Alloys and Compounds
685, 135-141
2016



31 Critical minerals and energy – impacts and limitations of moving to unconventional resources
Benjamin McLellan, Eiji Yamasue, Tetsuo Tezuka, Glen Corder, Artem Golev , Damien Giurco
Resources
5/ 2, 19-50
2016



32 Consuming Childhoods: An Assessment of Child Labor’s Role in Indian Production and Global Consumption
Jorge Gomez-Paredes, E. Yamasue, H. Okumura and Keiichi N. Ishihara
Journal of Industrial Ecology
20/ 3, 611-622
2016



33 Electrical Stability of Al-doped ZnO Transparent Electrode prepared by Sol-Gel Method
Samia Tabassum, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Applied Surface Science
377, 355-360
2016



34 Innovations in Steelmaking Technology and Hidden Phosphorus Flows
Kazuyo Matsubae, Eiji Yamasue, Tadahiro Inazumi, Elizabeth Webeck, Takahiro Miki, and Tetsuya Nagasaka
Science of the Total Environment
542, 1162-1168
2016



35 Effect of substrate roughness and working pressure on photocatalyst of N-doped TiOx films prepared by reactive sputtering with air
Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Applied Surface Science
324, 339-348
2015



36 Weight at Source for Phosphorous Fertilizer Production
Eiji Yamasue, Kazuyo Matsubae and Keiichi N. Ishihara
Global Environmental Research
19/ 11, 97-104
2015



37 Magnetic Field Effect on Heterogeneous Photocatalysis
Hideyuki Okumura, Susumu Endo, Supawan Joonwichen, Eiji Yamasue, and Keiichi N. Ishihara
Catalysis Today
258/ P2, 634-647
2015



38 蒸気輸送法による4CaO・P2O5および3CaO・P2O5の標準生成ギブズエネルギーの直接測定
山末英嗣,清水謙治,永田和宏
鉄と鋼
101/ 3, 169-176
2015



39 The Labour Footprint – An input-output approach to evaluate labour-related issues
Jorge Gomez-Paredes, E. Yamasue, H. Okumura and Keiichi N. Ishihara
Economic Systems Research
27/ 4, 415-439
2015



40 Sol-gel and RF sputtered AZO thin films: Analysis of Oxidation Kinetics in Harsh Environment
Samia Tabassum, Eiji YAMASUE, Hideyuki Okumura, Keiichi N. Ishihara
Journal of Materials Science: Materials in Electronics (JMSE)
25, 4883-4888
2015



41 製鋼スラグからのリン資源回収の可能性
松八重一代,久保裕也,山末英嗣,長坂徹也
環境技術
43/ 2, 15-21
2014



42 Adhesion Properties of milled CuO-CeO2/α-Al2O3 on Metallic Substrate for Automotive Catalytic Converter
Luong Nguyen, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Particulate Science and Technology
32/ 5, 529-536
2014



43 Sustainable Materials Management on the basis of Relationship between Materials’ Properties and Human Needs
Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Eiji Yamasue and Koichi Yagi
Matériaux & Techniques
112/ 5, 506-510
2014



44 Assessment of metal recovery efficiency for waste printed circuit boards in Vietnam with MEMRECS and different end-of-life scenarios
Le, H.L., Yamasue, E., Okumura, H., Ishihara, K.N.
Journal of Solid Waste Technology and Management
40/ 2, 100-116
2014



45 Damp heat stability of AZO transparent electrode and influence of thin metal film for enhancing the stability
Samia Tabassum, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Journal of Materials Science: Materials in Electronics
25, 3203-3208
2014



46 Energy Service Satisfaction in two Mexican Communities: a study on demographic, household, equipment and energy related predictors
Cravioto C. Jordi, Yamasue Eiji, Okumura Hideyuki and Ishihara Keiichi N
Energy policy
73, 110-126
2014



47 Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process
Hoang-Long Le, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Journal of Material Cycles and Waste Management
16/ 2, 298-305
2014



48 Metallurgical Evaluation of Farmer’s Steelmaking in Finland
Eiji Yamasue, Kazuhiro Nagata, Tadahiro Inazumi
ISIJ International
54/ 5, 1024-1029
2014



49 使用済み自動車から得られる鉄スクラップの関与物質総量
山末英嗣,松八重一代,中島謙一,醍醐市朗,石原慶一
鉄と鋼
100/ 6, 774-783
2014



50 Effect of process control agents (PCAs) on mechanochemical processes and contamination science
D. Shiba, E. Yamasue, K. N. Ishihara and H. Okumura
Materials Science Forum
787-786, 2665-2670
2014



51 Direct Determination of Standard Gibbs Energies of the Formation of 4CaO•P2O5 and 3CaO•P2O5 by Transpiration Method
Eiji Yamasue, Kenji Shimizu, Kazuhiro Nagata
ISIJ International
53/ 10, 1833-1840
2013



52 Road transport externalities in Mexico: Estimates and international comparisons
Cravioto C. Jordi, Yamasue Eiji, Okumura Hideyuki and Ishihara Keiichi N.
Transport policy
30, 63-76
2013



53 MEMRECS—A Sustainable View for Metal Recycling from Waste Printed Circuit Boards
Hoang-Long Le, Eiji YAMASUE, H. Okumura and K. Ishihara
Journal of Environmental Protection
4/ 8, 803-810
2013



54 Model for Evaluating Metal Recovery Efficiency of Complex Scraps (MEMRECS) - A Promising Measure for Calculation of Metal Recyclability
Hoang-Long Le, Eiji YAMASUE, Hideyuki Okumura, and Keiichi N. Ishihara
International Journal of Arts & Sciences
6/ 1, 73-87
2013



55 Using Total Material Requirement to Evaluate the Potential for Recyclability of Phosphorous in Steelmaking Dephosphorization Slag
Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Seiji Hashimoto, Tetsuya Nagasaka
J. Industrial Ecology
17/ 5, 722-730
2013



56 Quality Evaluation of Scrap Materials from Urban Buildings by means of Total Materials Requirement
Eiji Yamasue, Ryota Minamino, Ichiro Daigo, Hiroki Tanikawa, Hideyuki Okumura, Keiichi N. Ishihara and Paul. H Brunner
Journal of Industrial Ecology
17/ 4, 555-565
2013



57 Phase Stability of β-MoSi2-x Prepared by the Na Flux Method against Thermal, Oxidative and Mechanical Treatments
Kosuke O. Hara, Tomoya Fujii, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Journal of Materials Science
48/ 8, 3121-3127
2013



58 関与物質総量を用いた都市鉱山の評価
山末英嗣
検査技術
11, 57-64
2012



59 都市鉱山の有効利用と資源端重量
山末英嗣,橋本征二
金属
82/ 7, 585-588
2012



60 都市鉱山リサイクルの資源端重量
山末英嗣
金属
82/ 2, 115-121
2012



61 Milling Induced Polymorphic Transformation in MoSi2
Keiichi N. Ishihara, Eiji Yamasue, Hideyuki Okumura and Kosuke O. Hara
International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde)
103, 1130-1136
2012



62 Molecular Dynamics Study of the Milling-Induced Allotropic Transformation in Cobalt
Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Philosophical Magazine
92, 2117-2129
2012



63 Technical Impact Indicators for Materials
Ndumiso Dlamini, Eiji Yamasue, Hideyuki Okumura Keiichi N. Ishihara
Revue de Métallurgie
109, 305-321
2012



64 Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders
Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Applied Magnetic Resonance
42, 17-28
2012



65 都市鉱山に含まれる素材の品位評価~リサイクルの関与物質総量(資源端重量)~
山末英嗣,南埜良太,奥村英之,石原慶一
廃棄物資源循環学会誌
21/ 1, 11-18
2011



66 Magnetic field effects on photodecomposition of methylene blue over ZnO particles
Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
RSC Advances, The Royal Society of Chemistry
1, 1060-1063
2011



67 Effects of Magnetic Field on Photodegradation of Methylene Blue over ZnO and TiO2 Powders using UV-LED as a Light Source
Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi Ishihara
J. Chem. Chem. Eng
5, 729-737
2011



68 The environmental LCA of steel vs HDPE car fuel tanks with varied pollution control
Ndumiso G. Dlamini, Kenta Fujimura, Eiji Yamasue, Hideyuki Okumura & Keiichi N. Ishihara
International Journal of Life Cycle Assessment
16, 410-419
2011



69 Dynamic Equilibrium of MoSi2 Polymorphs during Mechanical Milling
K. O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
J. Alloys and Compounds
509/ 1, S243-S246
2011



70 Regional Development or Resource Preservation? A Perspective from Japanese Appliance Exports
Masaaki Fuse, Eiji Yamasue, Barbara Reck and Thomas Graedel
Ecological Economics
70, 788-797
2011



71 Special Issue on Growth of Ecomaterials as a Key to Eco-Society IV (PREFACE)
Osamu Umezawa, Yoshikazu Shinohara and Eiji Yamasue
Materials Transactions
51/ 5
2010



72 都市鉱山に含まれる元素・素材の「質」の関与物質総量の観点から見た評価
山末英嗣,南埜良太,奥村英之,石原慶一
日本LCA学会誌
6/ 2, 111-118
2010



73 Traditional Steelmaking in Southwestern Ethiopia: A Metallurgical Analysis
Eiji YAMASUE, Isao MURAHASHI and Keiichi N. ISHIHARA
Nile Ethiopian Studies
14, 1-18
2010



74 使用済み家電製品からの素材リサイクルに伴う関与物質総量(都市鉱石TMR)の推算と評価
山末英嗣,南埜良太,醍醐市朗,奥村英之,石原慶一
日本金属学会誌
74/ 12, 811-819
2010



75 Investigations on the Nitrogen Storage Property of LaNi5 powder
Fumiaki N. Ishikawa, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
J. Alloys and Compounds
4375-4580
2010



76 都市鉱山からの元素・材料のリサイクル性に関する新規評価手法 ―都市鉱石TMR―
山末英嗣,南埜良太,沼田健,中島謙一,村上進亮,醍醐市朗,橋本征二,奥村英之,石原慶一
日本金属学会誌
74/ 11, 718-723
2010



77 4d-GISを用いた都市重量の変化と建設資材のリサイクル性に関する検討
谷川寛樹,山末英嗣,稲津亮,前新将
土木学会環境システム研究論文集
38/ 9, 413-419
2010



78 ノートパソコンおよび携帯電話からの金属およびプラスチックリサイクルに必要なTMR(都市鉱石TMR)の算出と評価
南埜良太,山末英嗣,中島謙一,村上進亮,奥村英之,石原慶一
日本LCA学会誌
6/ 3, 251-258
2010



79 Hybrid LCA of a DfD technology: Active Disassembling Fasteners using Hydrogen Storing Materials implemented to Home Electric Appliances
Shinichiro NAKAMURA, Eiji YAMASUE
Environmental Science & Technology
44, 4402-4408
2010



80 Revisiting Carbon Based Metallic Compounds – Nanoscale Surface Science and Environmental Catalysis
Hideyuki Okumura, Kayo Arai, Yuichi Nishiyama, Eiji Yamasue, and Keiichi N. Ishihara
Materials Science Forum
638-642, 858-863
2010



81 Photocatalysis and surface doping states of N-doped TiOx filmsg prepared by reactive sputtering with dry air
Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Applied Catalysis B: Environmental
93/ 3-4, 217-226
2010



82 関与物質総量(TMR)を用いた使用済み製品に含まれる元素・素材のリサイクル性評価
山末英嗣,南埜良太,奥村英之,石原慶一
軽金属
59/ 11, 620-628
2009



83 Effect of oxygen and nitrogen concentration of nitrogen doped TiOx film as photocatalyst prepared by reactive sputtering
Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Applied Catalysis A: General
371/ 1--2, 179-190
2009



84 Evaluation of Total Materials Requirement for the Recycling of Elements and Materials (Urban Ore TMR) from End-of-Life Electric Home Appliances
Eiji Yamasue, Ryota Minamino, Ichiro Daigo, Hideyuki Okumura and Keiichi N. Ishihara
Materials Transactions
50/ 9, 2165-2172
2009



85 Preparation of N-doped TiOx films as photocatalyst using reactive sputtering with dry air
Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Materials Transactions
50/ 8, 1805-1811
2009



86 Novel Evaluation Method of Elemental Recyclability from Urban Mine, ~Concept of Urban-ore TMR ~
Eiji Yamasue, Ryota Minamino, Takeshi Numata, Kenichi Nakajima, Shinsuke Murakami, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara
Materials Transactions
50/ 6, 1536-1540
2009



87 使用済み携帯電話およびパーソナルコンピュータに含まれるレアメタル量の推計とそのインパクト評価
山末英嗣,沼田健,奥村英之,石原慶一
日本金属学会誌
73/ 3, 198-204
2009



88 Phase stability under high-energy ball milling in the Ti-O system
Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Journal of Physics: Conference Series
144, 12-21
2009



89 Use and disposal of large home electronic appliances in Vietnam
Duc-Quang Nguyen, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara
Journal of Material Cycles and Waste Management
11, 358-366
2009



90 都市鉱山としての家電製品ストック~ストック型社会構築に向けて~
山末英嗣,奥村英之,石原慶一
電気学会論文誌C
128/ 1, 6-10
2008



91 都市鉱山としての家電製品ストック~ストック型社会構築に向けて~
山末英嗣,奥村英之,石原慶一
電気学会論文誌C
128/ 1, 6-10
2008



92 家電製品の廃棄に伴うレアメタルの潜在的拡散量評価
山末英嗣, 中島謙一, 醍醐市朗, 松八重(横山)一代,橋本征二, 奥村英之,石原慶一
日本金属学会誌
72/ 8, 587-592
2008



93 Formation of supersaturated Fe-Li solid solution by mechanical alloying
Keiichi N. Ishihara, Fumie Kubo, Eiji Yamasue and Hideyuki Okumura
Reviews on Advanced Materials Science
18, 284-288
2008



94 Evaluation of Recycling System for Electronic Appliances in Vietnam
Duc-Quang Nguyen, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara
Development Engineering
14, 1-13
2008



95 メカニカルアロイングによるTiOの合成における吸着水の影響
原康祐,山末英嗣,奥村英之,石原慶一
粉体および粉末冶金学会誌
55/ 1, 26-32
2008



96 メカニカルミリングにより結晶構造変化した酸化チタンを用いたNO分解
山末英嗣,延原功一,邑瀬邦明,石原慶一
粉体および粉末冶金学会誌
54/ 10, 686-693
2007



97 エネルギー・環境教育の波及効果の検討
早渕百合子、山末英嗣、奥村英之、石原慶一
エネルギー環境教育
2, 61-67
2007



98 Evaluation of the Dissipated Amounts of Rare Metals from WEEE in Japan
Eiji Yamasue, Kenichi Nakajima, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara
Materials Transaction, JIM
48/ 9, 2353-2357
2007



99 エチオピア西南部における製鉄および鍛冶技術の冶金学的検証
山末英嗣,村橋勲,奥村英之,石原慶一
日本金属学会誌
48/ 9, 763-771
2007



100 Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases
T. Yokoi, E. Yamasue, H. Okumura and K. N. Ishihara
Materials Science Forum
534-536, 197-200
2007



101 Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties
K.N. Ishihara, K. Irie, F. Kubo, E. Yamasue, H. Okumura
Materials Science and Engineering A
449-451, 1067-1070
2007



102 Carbon Dioxide Reduction into Carbon by Mechanically-milled Wustite
E. Yamasue, H. Yamaguchi, A. Nakaoku, H. Okumura and K. N. Ishihara
Journal of Materials Science
42, 5196-9202
2007



103 Mechanical alloying, nitrogen storage and magnetization of Ca-Co powder
H. Okumura, F. N. Ishikawa, Y. Morotomi, E. Yamasue, K. N. Ishihara
Materials Science and Engineering A
449-451, 1123-1126
2007



104 Mechanical Alloying of Lithium-base Systems
K. N. Ishihara, F. Kubo, K. Irie, K. Shichi, E. Yamasue and H. Okumura
Journal of Alloys and Compounds
434-435, 542-545
2007



105 Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite
Eiji YAMASUE, Hironori YAMAGUCHI, Hideyuki OKUMURA and Keiichi N. ISHIHARA
Journal of Alloys and Compounds
434-435, 803-805
2007



106 新製品への代替を考慮した家電製品の廃棄台数予測
山末英嗣,中島謙一,奥村英之,石原慶一
日本金属学会誌
70/ 8, 611-614
2006



107 エチオピア西南部の製鉄技術と鉄器使用
村橋勲,山末英嗣
物質文化
81/ 6, 1-20
2006



108 Ni-Mo/TiO2複合めっきとその光触媒特性
邑瀬邦明、石田雅人、江森郁子、山末英嗣、平藤哲司、栗倉泰弘
表面技術
56/ 11, 692-697
2005



109 Mechanical alloying and nitrogen storage properties of Ca-Fe powder
F. N. Ishikawa, K. Irie, E. Yamasue, K. N. Ishihara, H. Okumura
Journal of Alloys and Compounds
395, 159-165
2005



110 小型たたら炉の炉サイズに関する考察
山末英嗣,林宏樹,石原慶一
鉄と鋼
91/ 1, 001-007
2005



111 仮想摩擦係数を用いた旅客輸送における統合的エネルギー効率の評価
醍醐市朗、若松貴史、山末英嗣、石原慶一
日本エネルギー学会
84/ 2, 119-125
2005



112 On the origin and stability of the metastabe phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix
V. Bhattacharya, E. Yamasue, K. N. Ishihara, K. Chattopadhyay
Acta Materilia
53/ 17, 593-4603
10/2005



113 資源生産性指標から見た再資源化
石原慶一,山末英嗣,醍醐市朗
電気学会メタボリズム社会・環境システム研究会論文集
MES-04-12, 21-24
2004



114 資源生産性指標から見た再資源化
石原慶一,山末英嗣,醍醐市朗
電気学会メタボリズム社会・環境システム研究会論文集
21-24
2004



115 自己粉砕ねじと家電リサイクルへの応用
石原慶一,山末英嗣
エネルギー資源学会誌
24/ 3, 184-187
2003



116 Deviation from Wiedemann-Franz law for Thermal Conductivity of liquid Tin and Lead at Elevated Temperature
Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA
International Journal of Thermophysics
24/ 3, 713-730
05/2003



117 自動車の燃料消費率の推移とその要因
山本将史,深澤恒典,山末英嗣,石原慶一
粉体および粉末冶金
49/ 5, 419
2002



118 Thermal conductivities of Silicon and Germanium in Solid and Liquid States Measured by Non-Stationary Hot Wire Method with Silica Coated Probe
Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA
Journal of Crystal Growth
234, 121-131
2002



119 Non-stationary Hot Wire Method with Silica-Coated Probe for Measuring Thermal Conductivities of Molten Metals
Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA
Metallurgical and Materials Transactions A
30, 1971-1979
08/1999