研究者学術情報データベース

スギヤマ　ススム
杉山　進
SUGIYAMA Susumu

所属総合科学技術研究機構

職名上席研究員

論文
1.	2013/03	Fabrication of 3-D PTFE Microstructures Utilising Change of Etching Rate with Respect to Exposure Time │ Microsystem Technologies, Vol.19, Issue 3, Mar.2013, Springer-Verlag │ 19 (3),351-356 (共著)
2.	2013/03	Influence of Developer Temperature on the Shape of Structures Fabricated by Deep X-ray Lithography │ Microsystem Technologies, Vol.19, Issue 3, Mar.2013, Springer-Verlag │ 19 (3),357-362 (共著)
3.	2012/11	穿刺用貫通型超音波探触子の基礎特性と針の検出原理 │ 電気学会論文誌Ｅ │ 132 (11),420-424 (共著)
4.	2012/08	Highly-sensitive Fluorescence Detection and Imaging with Microfabricated Total Internal Reflection (TIR)-based Devices │ Journal of Micro-Nano Mechatronics, Springer-Verlag (2012) │ ,45-59 (共著)
5.	2012/03	Development of Polymer MEMS Process Technology as an Approach to a Sustainable Production System │ Advances in Natural Sciences: Nanoscience and Nanotechnology, Vol.3, No.1, Mar. 2012, IOP Publishing Ltd. │ 3 (1),015009 (7pp) (共著)
6.	2012/01	Single Mask, Simple Structure Micro Rotational Motor Driven by Electrostatic Comb-Drive Actuators │ Journal of Micromechanics and Microengineering, Vol.22, No.1, Jan. 2012, IOP Publishing Ltd. │ 22 (1),015008 (7pp) (共著)
7.	2011/09	Longitudinal Strain Sensitive Effect in a Photonic Crystal Cavity │ Procedia Engineering, Vol.25, 2011, Elsevier Ltd. (Eurosensors 2011) │ 25,1357-1360 (共著)
8.	2011/09	Micromachined NH3 Gas Sensor with ppb-level Sensitivity Based on WO3 Nanoparticles Thinfilm │ Procedia Engineering, Vol.25, 2011, Elsevier Ltd. (Eurosensors 2011) │ 25,1149-1152 (共著)
9.	2011/09	ホットエンボスおよび研磨加工による可動構造を接合積層した大変位ポリマーMEMSの製作プロセス開発 │ エレクトロニクス実装学会誌、Vol.14, No.6, Sept.2011 │ 14 (6),507-512 (共著)
10.	2011/07	Development and Characterization of a Small Ring-Shaped Ultrasonic Probe for Biopsies │ Japanese Journal of Applied Physics, Vol.50, 2011, The Japan Society of Applied Physics │ 50,07HF03 (4pp) (共著)
11.	2011/07	Nanostrain Sensing Based on Piezo-Optic Property of a Photonic Crystal Cavity │ IEEJ Transactions on Sensors and Micromachines, The Inst. of Electrical Engineers of Japan │ 131 (7),258-263 (共著)
12.	2011/06	Development and Analysis of a Sliding Tactile Soft Fingertip Embedded with a Microforce/Moment Sensor │ IEEE Transactins on Robotics, June 2011 │ 27 (3),411-424 (共著)
13.	2011/06	First-Principles Simulation on Piezoresistivity in Alpha and Beta Silicon Carbide Nanosheets │ Japanese Journal of Applied Physics │ 50 (6),06GE05(6pp) (共著)
14.	2011/06	Novel Fabrication Process for a Monolithic PMMA Torsion Mirror and Vertical Comb Actuator │ Journal of Micromechanics and Microengineering, June 2011, IOP Publishing Ltd. │ 21 (6),065032(7pp) (共著)
15.	2011/05	Fabrication of 3-D Microstructures with Sidewall Inclination Controlled by Development Temperature │ Memoires of the SR Center, Ritsumeikan University, No. 13, May 2011 │ (13),23-30 (共著)
16.	2011/05	Study on Ni Mirror Chip for Space X-ray Telescopes Utilizing LIGA Process │ Memoires of the SR Center, Ritsumeikan University, No. 13, May 2011 │ (13),31-38 (共著)
17.	2011/04	Investigation of Strain Sensing Effect in Modified Single-defect Photonic Crystal Nanocavity │ Optics Express, Apr. 2011, The Optical Society of America (OSA) │ 19 (9),8821-8829 (共著)
18.	2011/02	Multimodule Micro Transportation System Based on Electrostatic Comb-Drive Actuator and Ratchet Mechanism │ IEEE/ASME Journal of Microelectromechanical Systems, Feb. 2011 │ 20 (01),140-149 (共著)
19.	2011/01	Towards Highly Sensitive Strain Sensing Based on Nanostructured Materials │ Advances in Natural Sciences: Nanoscience and Nanotechnology, IOP Publishing Ltd., 2010 │ 1,045012(8pp) (共著)
20.	2010/12	Integrated CNTs Thin Film for MEMS Mechanical Sensors │ Microelectronics Journal, Dec. 2010, Elsevier │ 41 (12),860-864 (共著)
21.	2010/11	Measurement of Mechanical and Thermal Properties of Co-sputtered WSi Thin Film for MEMS Applications │ Microsystem Technologies, Springer Berlin/Heidelberg, Nov. 2010 │ 16 (11),1881-1886 (共著)
22.	2010/10	A Novel Micro Transportation System with Fast Movement of a Micro Container Based on Electrostatic Actuation and a Ratchet Mechanism │ Journal of Micromechanics and Microengineering, IOP Publishing Ltd., UK&USA, 2010 │ 20 (11),115026(8pp) (共著)
23.	2010/10	Designing of a Si-MEMS Device with an Integrated Skeletal Muscle Cell-based Bio-actuator │ Biomedical Microdevices, 2010, Springer │ 0 (0),0 (共著)
24.	2010/08	Study on Fabrication of 3-D Microstructures by Synchrotron Radiation based on Pixels Exposed Lithography │ Microsystem Technologies, Springer Berlin/Heidelberg, Aug. 2010 │ 16 (8-9),.1331-1338 (共著)
25.	2010/07	Integratin of SWNT Film into MEMS for a Micro-thermoelectric Device │ Smart Materials and Structures, IOP Publishing Ltd., July 2010 │ 19 (7),075003(6pp) (共著)
26.	2010/06	Development of an Alternating Magnetic-field-assisted Finishing Process for Microelectromechanical Systems Micropore X-ray Optics │ Applied Optics, Vol.49, No.18, Optical Society of America (OSA), June 20, 2010 │ 49 (18),3511-3521 (共著)
27.	2010/06	First-Principles Simulation on Thickness Dependence of Piezoresistance Effect in Silicon Nanosheets │ Japanes Journal of Applied Physics │ 48 (6),06GH01(6pp) (共著)
28.	2010/06	Novel Three-Axis Solid-state Micro Accelerometer with Surrounding Beam Structure │ IEEJ Transactions on Sensors and Micromachines, The Inst. of Electrical Engineers of Japan, June 2010 │ 130 (6),242-246 (共著)
29.	2010/06	医療応用のための貫通孔を有する超音波円形プローブ │ 電子情報通信学会技術研究報告「信学技報」US2010-28 │ 110 (91),83-86 (共著)
30.	2010/05	Micro/nano-mechanical Sensors and Actuators based on SOI-MEMS Technology │ Advances in Natural Sciences: Nanoscience and Nanotechnology, IOP Publishing Ltd., UK │ 1 (1),013001(10pp) (共著)
31.	2010/05	Study on Fabrication of 3-D PTFE Structure Utilizing Change of Etching Rate with Respect to Exposure Time │ Memoirs of the SR Center, Ritsumeikan University, May 2010 │ (12),119-126 (共著)
32.	2010/05	Study on Fabrication of Arbitrary 3-D Structures Utilizing Pixels Exposed Lithography │ Memoirs of the SR Center, Ritsumeikan University, May 2010 │ (12),101-110 (共著)
33.	2010/05	Study on Height Control of 3-D Structures Fabricated Utilizing PCT Technique │ Memoirs of the SR Center, Ritsumeikan University, May 2010 │ (12),111-118 (共著)
34.	2010/05	高感度機械量センサのためのナノ材料の物性の測定と解析 │ 電気学会論文誌E、（社）電気学会 │ 130 (5),146-151 (共著)
35.	2010/03	First-Principles Simulation on Piezoresistive Properties in Doped Silicon Nanosheets │ IEEJ Transactions on Electrical and Electronic Engineering, Mar. 2010, John Wiley & Sons, Inc., Vol.5, No.2 │ 5 (2),157-163 (共著)
36.	2010/03	Shape Predictin of 3-D Microstructures Fabricated by PCT Technique and Synchrotron Radiation Lithography │ IEEJ Transactions on Electrical and Electronic Engineering, Mar. 2010, John Wiley & Sons, Inc. │ 5 (2),149-156 (共著)
37.	2010/03	Shape-predictin of 3D PTFE Microstructures Fabricated by Synchrotron Radiation Ablation │ IEEJ Transactions on Electrical and Electronic Engineering, Mar. 2010, John Wiley & Sons, Inc., Vol.5, No.2 │ 5 (2),143-148 (共著)
38.	2010/01	Individual Evaluation of DEP, EP and AC-EOF effects on λDNA Molecules in a DNA Concentrator │ Sensors and Actuators B: Chemical, Elsevier, Jan. 2010, Vol.143, Issue 2 │ 143 (2),769-775 (共著)
39.	2009/12	A MEMS-based Silicon Micropump with Intersecting Channels and Integrated Hotwires │ Journal of Micromechanics and Microengineering, Dec. 2009, IOP Publishing Ltd. │ 19 (12),125016 (7pp) (共著)
40.	2009/12	A Monolithic Dual-Color Total-Internal-Reflection-Based Chip for Highly Sensitive and High-Resolution Dual-Fluorescence Imaging │ Journal of Microelectromechanical Systems, Dec. 2009, IEEE │ 18 (6),1371-1381 (共著)
41.	2009/12	Development of Polymer Electrostatic Comb-drive Actuator Using Hot Embossing and Ultraprecision Cutting Technology │ Journal of Micro/Nanolithography, MEMS, and MOEMS, SPIE, Oct-Dec 2009, Vol.8, Issue 4 │ 8 (4),043065 (5PP) (共著)
42.	2009/12	Fabrication of Optically Smooth, Through-Wafer Silicon Molds for PDMS Total Internal Reflection-based Devices │ Microsystem Technologies, Dec. 2009, Springer Berlin/Heidelberg │ 15 (12),1845-1853 (共著)
43.	2009/11	Wet Releasing and Stripping SU-8 Structures with a Nanoscale Sacrificial Layer │ Microelectronic Engineering, Nov. 2009, Vol.86, Issue 11, Elsevier │ 86 (11),2232-2235 (共著)
44.	2009/07	A Cross-Junction Channel Valveless-Micropump with PZT Actuation │ Microsystem Technologies, July 2009, Springer Berlin/Heidelberg │ 15 (7),.1039-1044 (共著)
45.	2009/07	Simulation of Piezoresistivity in n-type Single-Crystal Silicon on the basis of the First-Principles Band Structure │ Physical Review B, The American Physical Society │ 80 (04),045205 (11pp) (共著)
46.	2009/06	A Micro Electromagnetic Low Level Vibration Energy Harvester Based on MEMS Technology │ Microsystem Technologies, June 2009, Springer Berlin/Heidelberg │ 15 (6),941-951 (共著)
47.	2009/06	First-Principles Simulation on Orientation Dependence of Piezoresistance Properties in Silicon Nanowires │ Japanese Journal of Applied Physics, The Japan Society of Applied Physics │ 48 (06),06FG09 (5pp) (共著)
48.	2009/05	Developing a Wearable System with MEMS Accelerometer for Real-Time Activity Monitoring │ IEEJ Transactions on Sensors and Micromachines, the Inst. of Electrical Engineers of Japan │ 129 (5),142-147 (共著)
49.	2009/05	Fabrication of 3D Micro/nanostuructures Using Proximity Effect Between Mask and Resist │ Memoirs of the SR Center, Ritsumeikan University, May 2009, No.11 │ (11),3-10 (共著)
50.	2009/05	Study on Mask-pattern Design for Fabrication of 3-D Structures Utilizing PCT Technique │ Memoirs of the SR Center, Ritsumeikan University, May 2009, No.11 │ (11),31-40 (共著)
51.	2009/05	Study on Newly 3-D SR Lithography Fabrication Method Utilizing PDMS Mold │ Memoirs of the SR Center, Ritsumeikan University, May 2009, No.11 │ (11),21-30 (共著)
52.	2009/05	Study on SR Lithography Using Mask-less Exposure Method │ Memoirs of the SR Center, Ritsumeikan University, May 2009, No.11 │ (11),11-20 (共著)
53.	2009/03	Design and Simulation of a Valveless Micro Pump │ Journal of Advanced Mechanical Design, Systems, and Manufacturing, Japan Society of Mechanical Engineers │ 3 (1),69-75 (共著)
54.	2009/01	Versatile Microfluidic Total Internal Reflection (TIR)-based Devices: Application to Microbeads Velocity Measurement and Single Molecule Detection with Upright and Inverted Microscope │ Lab on a Chip, The Royal Society of Chemistry, UK │ 9 (2),244-250 (共著)
55.	2008/11	Fabrication and Basic Characterization of a Piezoelectric Valveless Micro Jet Pump │ Japanese Journal of Applied Physics, The Japan Society of Applied Physics │ 47 (11),8615-8618 (共著)
56.	2008/10	3-D PTFE Microstructure Fabricated Using Synchrotron Radiation Etching │ Microsystem Technologies, Oct. 2008, Springer Berlin/Heidelberg │ 14 (9-11),1695-1698 (共著)
57.	2008/10	Simulation and Fabrication of a Convective Gyroscope │ IEEE Sensors Journal, IEEE Sensors Council │ 8 (9-10),1530-1538 (共著)
58.	2008/09	Development of a Flexible Thermopile Power Generator Utilizing BiTe-Cu Thin Films │ IEEJ Transactions on Sensors and Micromachines, the Inst. of Electrical Engineers of Japan │ 128 (9),352-357 (共著)
59.	2008/05	A Study to Reduce Surface Roughness of a PMMA Sheet in the X-ray Lithography Technique │ Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),41-47 (共著)
60.	2008/05	Design and Simulation of a Novel 3-DOF MEMS Convective Gyroscope │ IEEJ Transactions on Sensors and Micromachines, the Inst. of Electrical Engineers of Japan, Vol.128, No.5, 2008 │ 128 (5),219-224 (共著)
61.	2008/05	Development of a 3-DOF Micro Accelerometer with Wireless Readout │ IEEJ Transactions on Sensors and Micromachines, the Inst. of Electrical Engineers of Japan, Vol.128, No.5, 2008 │ 128 (5),235-239 (共著)
62.	2008/05	Fabrication of 3D Micro/nanostructures Using Proximity Effect between Mask and Resist │ Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),19-26 (共著)
63.	2008/05	Replication Process for 3-D Structure Using PDMS Mold │ (Short Notes) Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),164-165 (共著)
64.	2008/05	Research of New Technology for Arbitrary 3D Structure Using SR Lithography │ Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),13-18 (共著)
65.	2008/05	Shape-prediction of 3-D PTFE Microstructures Fabricated by SR Ablation │ Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),27-34 (共著)
66.	2008/05	Study of Digital Level Exposure at BL-5 │ (Short Notes) Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),162-163 (共著)
67.	2008/05	Study on Deep X-ray Lithography for Fabrication of Microactuator │ Memoirs of the SR Center, Ritsumeikan University, May 2008, No.10 │ (10),35-40 (共著)
68.	2007/12	A 2-DOF Convective Micro Accelerometer with a Low Thermal Stress Sensing Element │ Smart Materials and Structures, Institute of Physics Publishing Ltd., UK, Dec. 2007 │ 16 (6),2308-2314 (共著)
69.	2007/12	Transcriptome Analysis Device based on Liquid Phase Detection by Fluorescently Labeled Nucleic Acid Probes │ Biomedical Microdevices, Springer Netherlands, Dec. 2007 │ 9 (6),869-875 (共著)
70.	2007/10	A Micro Transportation System (MTS) with Large Movement of Containers Driven by Electrostatic Comb-drive Actuators │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK, Oct. 2007 │ 17 (10),2125-2131 (共著)
71.	2007/08	Development of a Dual-Axis Convective Gyroscope with Low Thermal-Induced Stress Sensing Element │ Journal of Micro Electromechanical Systems, IEEE/ASME, Aug. 2007 │ 16 (4),950-958 (共著)
72.	2007/07	Optimizatin of PZT Diaphragm Pump for the Convective Gyroscope │ IEEJ Transactions on Sensors and Micromachines, the Inst. of Electrical Engineers of Japan │ 127 (7),347-352 (共著)
73.	2007/06	3D PTFE Structures Fabricated by PCT (Plane Pattern to Cross Section Transfer) Technique │ Memors of the SR Center, Ritsumeikan University, June 2007 │ (9),17-24 (共著)
74.	2007/06	Design, Simulation and Fabrication of a Total Internal Reflection (TIR)-based Chip for Highly Sensitive Fluorescent Imaging │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 17 (6),1139-1146 (共著)
75.	2007/06	Optimization of SR Exposure and Etching Technoques for Microneedle Structure with Deep-hole │ Memors of the SR Center, Ritsumeikan University, June 2007 │ (9),9-16 (共著)
76.	2007/06	Pattern-formation Technology for Arbitrary 3D Structure Using SR Lithography │ Memors of the SR Center, Ritsumeikan University, June 2007 (Short Notes) │ (9),99-100 (共著)
77.	2007/06	Performance of Multi-directional SR-exposure Stages for Micro/Nanofabrication at BL-5 │ Memors of the SR Center, Ritsumeikan University, June 2007 (Short Notes) │ (9),97-98 (共著)
78.	2007/06	SR Lithography for Optical Device Applications: Sub-wavelength Structure and Diffractive Optical Elements │ Memors of the SR Center, Ritsumeikan University, June 2007 │ (9),25-30 (共著)
79.	2007/03	Fabrication and Characterization of 3-DOF Soft-Contact Tactile Sensor Utilizing 3-DOF Micro Force Moment Sensor │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 127 (3),177-181 (共著)
80.	2007/03	Fabrication and Characterization of Smooth Si Mold for Hot Embossing Process │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 127 (3),187-191 (共著)
81.	2007/02	Fabrication of High Aspect Ratio Nano Gratings Using SR Lithography │ Microsystem Technologies, Springer Berlin/Heidelberg │ 13 (3-4),221-225 (共著)
82.	2007/02	Fabrication of Microgratings on PMMA Plate and Curved Surface by Using Copper Mesh as X-ray Lithography Mask │ Microsystem Technologies, Springer Berlin/Heidelberg │ 13 (3-4),227-230 (共著)
83.	2007/02	Geometrical Strengthening and Tip-sharpening of a Microneedle Array Fabricated by X-ray Lithography │ Microsystem Technologies, Springer Berlin/Heidelberg │ 13 (3-4),209-214 (共著)
84.	2007/02	Mask Design Compensation for Sloped Sidewall Structures Fabricated by X-ray Lithography │ Microsystem Technologies, Springer Berlin/Heidelberg │ 13 (3-4),215-219 (共著)
85.	2006/12	Simulation, Fabrication and Characterization of a Three-axis Piezoresistive　Accelerometer │ Smart Materials and Structures, Institute of Physics Publishing Ltd., UK │ 15 (6),1691-1699 (共著)
86.	2006/12	Straight Movement of Micro Containers Based on Ratchet Mechanism and Electrostatic Comb-drive Actuators │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 16 (12),2532-2538 (共著)
87.	2006/11	A Micromachined Thermal Flow Sensor Applied to a PC Mouse Device │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (11),607-611 (共著)
88.	2006/11	Development of a Large-force Low-loss Metal-contact RF MEMS Switch │ Sensors and Actuators A: Physical, Elsevier │ 132 (2),683-688 (共著)
89.	2006/09	シリコン歪ゲージを用いた力計測用マイクロセンサ－力センサの構造設計，試作，評価実験－ │ 日本ロボット学会誌 │ 24 (6),754-765 (共著)
90.	2006/07	Design and Fabrication of Polymer Electrostatic Comb-Drive Actuators for Micro Conveyer Systems │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (7),306-311 (共著)
91.	2006/07	Development of a Dual-axis Thermal Convective Gas Gyroscope │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 16 (7),1301-1306 (共著)
92.	2006/07	Development of Miniaturized 6-axis Accelerometer Utilizing Piezoresistive Sensing Elements │ Sensors and Actuators A: Physical, Elsevier │ 134,310-320 (共著)
93.	2006/07	Fabrication of Diaphragm Actuator Using Bulk PZT │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (7),302-305 (共著)
94.	2006/07	Mirror Deformation by Piezoelectric Acuators │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (7),325-329 (共著)
95.	2006/07	Simulation for Submicron 3D-Structures based on Plane-pattern to the Cross-section Transfer (PCT) Technique │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (7),330-333 (共著)
96.	2006/06	SOI ウェハを用いた5軸モーションセンサとその設計一手法 │ 電気学会論文誌E,、電気学会 │ 126 (6),261-268 (共著)
97.	2006/05	A Dual Axis Accelerometer Utilizing Low Doped Silicon Thermistor │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (5),190-194 (共著)
98.	2006/05	Application of Collective Synchronization to Sensor Data Processing │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 126 (5),185-189 (共著)
99.	2006/04	Capillary Rise Modeling and Fabrication of Crown-shaped Microneedle Array for Blood Extraction │ Memoires of the SR Center, Ritsumeikan University, No.8 │ (8),19-26 (共著)
100.	2006/04	Development of Fabrication Process for Shape-controlled Three-dimensional Nanostructures │ Memoires of the SR Center, Ritsumeikan University │ (8),27-35 (共著)
101.	2006/04	Geometrical Improvements of Hollow Microneedle Fabrications by Alighnment X-ray Lithography │ Memoires of the SR Center, Ritsumeikan University │ (8),13-18 (共著)
102.	2006/04	Microfabrication of Thick Through Silicon for Use as X-ray Lithography Masks │ (Short Notes) Memoires of the SR Center, Ritsumeikan University, No.8, Apr. 2006 │ (8),179-180 (共著)
103.	2006/04	Microneedle Fabrication Using the Plane Pattern to Cross-section Transfer Method │ Smart Materials and Structures, Institute of Physics Publishing Ltd., UK │ 15 (2),600-606 (共著)
104.	2006/04	Novel Poly-L-Lactides Micromachining by X-ray Lithography │ (Short Notes) Memoires of the SR Center, Ritsumeikan University, No.8, Apr. 2006 │ (8),181-182 (共著)
105.	2006/04	Shape-Prediction of Microstructures Fabricated by PCT Technique │ Memoires of the SR Center, Ritsumeikan University, No.8 │ (8),37-44 (共著)
106.	2006/04	Simulation and Fabrication of Submicron 3D Structure by PCT (Plane-pattern to the Cross-section Transfer) Technique │ Memoires of the SR Center, Ritsumeikan University │ (8),3-12 (共著)
107.	2006/04	Study on Fabrication of Polymer Electrostatic Comb-drive Actuator by X-ray Lithography │ (Short Notes) Memoires of the SR Center, Ritsumeikan University, Apr. 2006 │ (8),177-178 (共著)
108.	2006/04	Wafer Bonding of Lead Zirconate Titanate to Si Using an Intermediate Gold Layer for Microdevice Application │ Journal of Micromechanics and Microenginnering, IOP Publishing Ltd, UK │ 16 (4),815-820 (共著)
109.	2006/01	Fabrication of Submicron Three-Dimensional Structure by Plane-Pattern to the Cross-Section Transfer Method Using Synchrotron Radiation Lithography │ Proceedings of SPIE-Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, Vol.6037 │ 6037 (共著)
110.	2005/12	A Single-Axis Thermal Convective Gas Gyroscope │ Sensors and Materials, MYU, Tokyo │ 17 (8),453-463 (共著)
111.	2005/12	Development of Micro Motion Sensors Based on Piezoresistive and Thermo-resistive Effects in Silicon │ Proceedings of SPIE-Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, Vol.6037 │ 6037 (共著)
112.	2005/08	Fabrication of Flexible Thermopile Generator │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 15,S233-S238 (共著)
113.	2005/07	Design and Fabrication of a Miniaturized Six-Degree-of-Freedom Piezoresistive Accelerometer │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 15,1745-1753 (共著)
114.	2005/06	The Fabrication and Test of a Square Prism Shaped Dye Micro Laser Based on the SU-8 Molding Process │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing Ltd, UK │ 15,1571-1575 (共著)
115.	2005/04	Dye Doped PMMA Microcavity Resonator Based on X-ray Lithography │ (Short Notes) Memoirs of the SR Center, Ritsumeikan University, No. 7, April 2005 │ (7),103-104 (共著)
116.	2005/04	Fabrication of Micro Structures on Curve Surface by X-ray Lithography │ Memoirs of the SR Center, Ritsumeikan University │ (7),19-23 (共著)
117.	2005/04	Shape-Compensation of 3-D Structure Fabrication by X-ray Lithography │ (Short Notes) Memoirs of the SR Center, Ritsumeikan University, No. 7, April 2005 │ (7),101-102 (共著)
118.	2005/04	Through-Hole Microneedle Fabricated by Alignment X-ray Lithography │ Memoirs of the SR Center, Ritsumeikan University │ (7),25-30 (共著)
119.	2005/02	Fabrication and Simulation of Novel Crown-shaped Microneedle Array │ Proceedings of SPIE-Biomedical Applications of Micro- and Nanoengineering II, Feb. 2005, Vol.5651 │ 5651,288-297 (共著)
120.	2005/02	Method for Accurate Shape Prediction of 3D Structure Fabricated by X-ray Lithography │ Proceedings of SPIE-Micro-and Nanotechnology: Materials, Processes, Packaging, and Systems II, Feb. 2005, Vol.5650 │ 5650,418-428 (共著)
121.	2004/12	Two New Types of Microneedle Array Fabricated by X-ray Lithography │ Proceedings of SPIE-MEMS/MOEMS Technologies and Applications II, Dec. 2004, Vol.5641 │ 5641,188-195 (共著)
122.	2004/12	X-ray Lithography Mask Fabricated by Excimer Laser Process │ Proceedings of SPIE-MEMS/MOEMS Technologies and Applications II, Dec. 2004, Vol.5641 │ 5641,316-322 (共著)
123.	2004/10	Plain-pattern to Cross-section Transfer (PCT) Technique for Deep X-ray Lithography and Applications │ Journal of Micromechanics and Microengineering, Institute of Physics Publishing │ 14,1399-1404 (共著)
124.	2004/04	Application of SPD/PM Process to Produce a TiC/Ti5Si3 Nano Grained Composite Using LIGA Micro-structure │ Memoirs of the SR Center, Ritsumeikan University │ (6),13-19 (共著)
125.	2004/04	Optimization of Tilt-Angle Dependence of Microneedle Tip-Size Fabricated by PCT Technique │ Memoirs of the SR Center, Ritsumeikan University │ (6),21-28 (共著)
126.	2004/04	Quadruplets-Microneedle Array for Bio-Medical Application │ Memoirs of the SR Center, Ritsumeikan University │ (6),29-35 (共著)
127.	2004/04	放射光リソグラフィーによる三次元マイクロ・ナノ構造の形成 │ 応用物理学会「応用物理」 │ 73 (4),､pp.466-469 (単著)
128.	2004/04	立命館大学21席COEプログラム「マイクロ・ナノサイエンス・集積化システム」の紹介 │ 電気学会論文誌E、電気学会 │ 124 (4),156-157 (単著)
129.	2004/02	Application of Pseud-superplasticity to Produce TiN/Ti5Si3 and TiC/Ti5Si3 Nano Grain Composites for Micro Molding │ Materials Science Forum │ 447-448,311-316 (共著)
130.	2004/02	放射光による微細加工 │ 「高分子」(社)高分子学会 │ 53 (2),70-73 (単著)
131.	2003/12	Fabrication of Alloy and Ceramic Microstructures by LIGA-MA-SPS Process │ Sensors and Actuators A Physical, Elsevier │ 108,250-257 (共著)
132.	2003/12	Microneedle Array and Insertion Guide Array for Safe Use of Biomedical Applications │ SPIE-The International Soc. For Optical Engineering │ 5275,231-238 (共著)
133.	2003/12	Single Crystal Silicon Piezoresistive Nano-Wire Bridge │ Sensors and Actuators A Physical, Elsevier │ 108,244-249 (共著)
134.	2003/11	LIGAプロセスによる3次元微細加工 │ 日本塑性加工学会誌 │ 44 (514),9-12 (単著)
135.	2003/11	放射光リソグラフィーによる3次元マイクロ・ナノ構造の製作 │ 「化学工業」化学工業社 │ 54 (11),51-55 (単著)
136.	2003/09	Design of a Micro Reciprocating Engine for Power Generation │ IEEJ Transactions on Sensors and Micromachines, The Institute of Electrical Engineers of Japan │ 123 (9),351-356 (共著)
137.	2003/08	放電プラズマ焼結法を利用した金属間化合物系材料の製造 │ 日本材料科学会誌「材料の科学と工学」日本材料科学会 │ 40 (4),24-28 (共著)
138.	2003/07	LIGAプロセスの産業への応用事例 │ 平成15年度第3回ナノテク研究会、（社）滋賀工業会 │ ,1-12 (単著)
139.	2003/07	MA-SPS粉末焼結法のLIGAプロセスへの応用 │ 「材料」日本材料学会 │ 52 (7),783-788 (共著)
140.	2003/05	Silicon Piezoresistive Six-Degree of Freedom Force-Moment Micro Sensor │ Sensors and Materials, MYU, Tokyo │ 15 (3),113-135 (共著)
141.	2003/04	Fabrication of Nano-Grained TiC/Ti5Si3 Micro-Molds by the LIGA-MA Process │ Memoirs of the SR Center, Ritsumeikan University, April 2003 │ (5),9-16 (共著)
142.	2003/02	研究室だより：立命館大学　マイクロシステム技術研究センター │ 電気学会論文誌E、（社）電気学会 │ 123 (2),57-58 (単著)
143.	2003/01	Piezoresistance Measurement on Single Crystal Silicon Nanowires │ Memoirs of the SR Center, Ritsumeikan University, April 2003 │ 93 (1),561-565 (共著)
144.	2003/01	マイクロ・ナノマシン製造インフラストラクチャー（ファンダリー・ネットワーク構築に向けて） │ 「計測と制御」(社)計測自動制御学会 │ 42 (1),12-17 (単著)
145.	2002/11	Study on Three-dimensional Micromachining Using Synchrotron Radiation Etching │ Microsystem Technologies, Springer │ 9 (1-2),1-4 (共著)
146.	2002/10	Analysis of Piezoresistance in n-Type β-SiC for High-Temperature Mechanical Sensors │ Applied Physics Letters, Oct. 2002, American Institute of Physics │ ,Vol. 81, No.15, pp.2797-2799 (共著)
147.	2002/10	Analysis of Piezoresistance in p-Type Silicon for Mechanical Sensors │ Journal of Microelectromechanical Systems, Oct. 2002, IEEE │ ,Vol. 11, No. 5, pp.598-604 (共著)
148.	2002/10	Single Crystal Silicon Nano-Wire Piezoresistors for Mechanical Sensors │ Journal of Microelectromechanical Systems, Oct. 2002, IEEE │ ,Vol. 11, No. 5, pp.605-611 (共著)
149.	2002/07	Design and Fabrication of Six-Degree of Freedom Piezoresistive Turbulent Water Flow Sensor │ Journal of the Korean Sensors Society, July 2002, The Korean Sensors Society │ ,Vol.11, No.4, pp.191-199 (共著)
150.	2002/07	ハイアスペクト比X線リソグラフィ（LIGA）の現状 │ 電気学会講習会「マイクロプロセスとそのプロセス技術の動向」、電気学会、東京 │ (単著)
151.	2002/06	シンクロトロン放射(SR)光リソグラフィーによる三次元微細構造の製作と応用 │ 「科学とマイクロ･ナノシステム」科学とマイクロシステム研究会 │ 1 (1),1-6 (単著)
152.	2002/05	Micro Connector for High Packaging Density Fabricated by Using UV Thick Photoresist │ The Transactions of The Institute of Electrical Engineers of Japan, The Inst. of Electrical Engineers of Japan │ ,Vol. 122-E, No.5, pp.249-255 (共著)
153.	2002/05	Self-standing Polysilicon-metal Thermopile for Micro Power Generator │ The Transactions of The Institute of Electrical Engineers of Japan, The Inst. of Electrical Engineers of Japan │ ,Vol. 122-E, No.5, pp.256-260 (共著)
154.	2002/04	微細構造製造プロセス技術 │ 「電気学会技術報告」（E部門）、電気学会 │ (878),､pp.33-35 (単著)
155.	2002/03	シンクロトロン放射光によるマイクロマシン製作技術 │ 先端技術普及セミナー「シンクロトロン放射光によるマイクロマシン製作技術」京都市工業試験場、鍍秀会 │ (単著)
156.	2002/01	Design of a Micro Multi-Axis Force-Moment Sensor │ Trans. IEE of Japan, Jan. 2002, IEEJ │ ,Vol.122-E, No.1, pp.35-41 (共著)
157.	2001/11	平成12年度機能性材料の3次元微細加工技術に関する調査研究報告書 │ （財）先端加工技術振興協会 │ ,pp.55-63 (共著)
158.	2001/05	Development of Plastic Injection Molding Using the LIGA Process │ 電気学会論文誌 │ E121 (5),, pp.266-274 (共著)
159.	2001/04	A Study on the Sub-Micron LIGA Process │ Memoires of the SR Center, Ritsumeikan University │ ,No.3, pp.53-65 (共著)
160.	2001/04	Characteristics of Polycrystalline Si Nano Wire Piezoresistors │ 電気学会論文誌 │ E121 (4),, pp.209-214 (共著)
161.	2001/04	Development of Plastic Injection Molding Using the LIGA Process │ Memoires of the SR Center, Ritsumeikan University │ ,No.3, pp.67-83 (共著)
162.	2001/04	Fabrication of Thick Film Magnetic Cores for High Frequency Using LIGA Process │ Memoires of the SR Center, Ritsumeikan University │ (3),33-41 (共著)
163.	2001/04	High Aspect Ratio Structure for a Capacitive Low-G Accelerometer │ Memoires of the SR Center, Ritsumeikan University │ ,No.3, pp.157-158 (共著)
164.	2001/04	Three-Dimensional Micromachining of PTFE Using Synchrotron Radiation Light │ Memoires of the SR Center, Ritsumeikan University │ ,No.3, pp.43-51 (共著)
165.	2001/04	Three-Dimensional Micromachining of PTFE Using Synchrotron Radiation Light │ 電気学会論文誌 │ E121 (4),, pp.204-208 (共著)
166.	2001/03	Direct Writing for Three-Dimensional Microfabrication Using Synchrotron Radiation Etching │ Sensors and Actuators, A, Physical, Elsevier │ ,Vol.89, pp.10-15 (共著)
167.	2001/01	A Study on the Sub-Micron LIGA Process │ 電気学会論文誌E │ 121 (1),, pp.45-50 (共著)
168.	2000/12	Isotropic Piezoresistance in Polycrystalline Silicon for In-plane Shear-and Normal-Stress Gauges │ Sensors and Mateials, MYU, Tokyo │ ,Vol.12, No.8, pp.473-490 (共著)
169.	2000/11	Fabrication of Sub-Micron Structures for MEMS Using Deep X-ray Lithography │ Microsystem Technologies, Springer │ ,Vol. 6, No. 6, pp.210-213 (共著)
170.	2000/11	High Aspect Ratio Electrostatic Micro Actuators Using LIGA Process │ Microsystem Technologies, Springer │ ,Vol. 6, No. 6, pp.218-221 (共著)
171.	2000/07	Fabrication of Sub-Micron Structures with High Aspect Ratio for Practical MEMS │ 電気学会論文誌E │ 120 (7),, pp.339-344 (共著)
172.	2000/04	Fabrication of High Aspect Ratio Sub-Micron Structures Using LIGA Process │ Memoirs of the SR Center, Ritsumeikan University │ ,No.2 (共著)
173.	2000/04	Study on 3-Dimensional Micromachining of PTFE Using Synchrotron Radiation Light │ Memoirs of the SR Center, Ritsumeikan University │ ,No.2 (共著)
174.	2000/03	3軸の応力成分を利用した高圧測定用シリコンピエゾ抵抗型圧力センサの開発 │ 立命館大学理工学研究所紀要　1999年 │ (58),, pp.103-113 (共著)
175.	1999/10	Study on Fabrication of High Aspect Ratio Electrostatic Micro Actuators Using LIGA Process │ Memoirs of the SR Center, Ritsumeikan University, October 1999 │ ,No.1, pp.23-32 (共著)
176.	1999/10	X-Ray Mask with SiC Membrane for LIGA Process │ Memoirs of the SR Center, Ritsumeikan University, October 1999 │ ,No.1, pp.33-44 (共著)
177.	1999/09	LIGAプロセス技術 │ 日本学術振興会プラズマ材料科学第153委員会第43回研究会、東京 │ (単著)
178.	1999/06	Piezoresistive Force Sensor Utilizing Combination of Three-Axis Stress Components │ 電気学会論文誌E │ 119 (6),, pp.327-333 (共著)
179.	1999/04	X-ray Mask with SiC Membrane for LIGA Process │ 電気学会論文誌Ｅ │ 119 (4),, pp.229-235 (共著)
180.	1999/03	微少音響アレーを用いた特性可変吸音デバイス │ 電子情報通信学会論文誌C－II │ ,Vol.J82-C II, No.3, pp.95-100 (共著)
181.	1999/02	小型シンクロトロン放射光を用いた高アスペクト比マイクロマシン製作の研究 │ 放射線利用振興協会、「放射線と産業」 │ (81),, pp.25-31 (単著)
182.	1998/11	Crystal Anisotropy of Elastoresistance Effect of Semiconductive Piezoresistor and Its Application to Transducers │ Proceedings of the 1998 Internatioal Symposium on Micromechatronics and Human Science,IEEE │ (共著)
183.	1998/11	Study on Fabricaiton of High Aspect Ratio Electrostatic Micro Actuators using LIGA Process │ Proceedings of the 1998 International Symposium on Micromechatronics and Human Science,IEEE │ ,pp.155-160 (共著)
184.	1998/08	Vacuum-Sealed Silicon Micromachined Pressure Sensors │ Proceedings of the IEEE │ ,Vol.86, No.8, pp.1627-1639 (共著)
185.	1998/04	A Point Mass Circular Movement Gyroscope │ 電気学会論文誌Ｅ（センサ・マイクロマシン部門誌） │ 118 (4),, pp.235-239 (共著)
186.	1998/03	半導体ピエゾ抵抗素子のひずみ－抵抗係数とその結晶方位依存性 │ 立命館大学理工学研究所紀要 │ (56),, pp.157-170 (共著)
187.	1998/02	Study on Fabrication of High Aspect Rario MEMS Microparts Using a Compact SR Beamline │ Microsystem Technologies │ ,Vol.4, No.2, pp.61-63 (共著)
188.	1997/12	Silicon IC Compatible LIGA Mask-fabrication Process │ Microsystem Technologies,Springer │ ,Vol.4, No.1, pp.7-11 (共著)
189.	1997/12	マイクロマシーニングのセンサへの応用 │ 電気学会誌 │ 117 (12),, pp.828-831 (単著)
190.	1997/11	マイクロマシン協同試作プロジェクト │ 応用物理学会誌 │ 66 (11),, p.1240 (単著)
191.	1997/08	機械工学年鑑(18章) │ 日本機械学会誌 │ ,Vol.100, No.945, p.78 (共著)
192.	1997/03	小型SRビームラインを用いたPMMAの高アスペクト比X線リソグラフィーの検討 │ 立命館大学理工学研究所紀要 │ ,No.55, pp.155-162 (共著)
193.	1996/06	マイクロマシニング・マルチチップサービスの期待と課題 │ 電気学会論文誌Ｅ（センサ・マイクロマシン部門誌） │ 116 (6),, pp.209-212 (単著)
194.	1996/01	Micromachined Sensors Using Polysilicon Sacrificial Layer Etching Technology │ IEEE Technical Digest of the International Electron Devices Meeting │ ,Vol.8, No.1, pp.57-67 (共著)
195.	1995/08	LIGA&マイクロマシーニング │ 電気学会センサ・マイクロマシン部門Transducers'95報告会資料 │ ,pp.9-20 (単著)
196.	1995/04	インテリジェントセンサデバイスの技術動向 │ 電気学会技術報告、インテリジェントセンサデバイス調査専門委員会 │ ,pp.3-7 (共著)
197.	1993/05	Surface-Micromachined Microdiaphragm Pressure Sensors │ Sensors and Materials Vol.4,No.5 MYU │ ,Vol.4, No.5, pp.265-275 (共著)
198.	1993/04	センサ機能・材料の先端技術動向 │ 『電気学会技術報告』電気学会・センサ機能・材料調査専門委員会 │ (共著)
199.	1993/01	マイクロマシニングによる圧力センサとアクチュエータ │ コンピュトロール │ ,No.41, pp.104-109 (共著)
200.	1993	多結晶シリコン犠牲層エッチング技術とその応用 │ 次世代センサ │ ,Vol.3, No.1, pp.9-13 (共著)
201.	1992/12	Surface-Micromachined Micro-Pressure-Sensor │ 『電気学会論文誌C』電気学会 │ 112-C (12),, pp.736-742 (共著)
202.	1992/07	Anisotropic Etching of Silicon in TMAH Solutions │ 『Sensors and Actuators』Elsevier Sequoia S.A/(Swizerland) A34巻 │ ,Vol.34, pp.51-57 (共著)
203.	1992/07	Digital Compensated Capacitive Pressure Sensor Using CMOS Technology for Low-Pressure Measurements │ 『Sensors and Actuators』A34巻 Elsevier Sequoia S.A.(Swizerland) │ ,Vol.A34, pp.173-177 (共著)
204.	1992/07	微小機械の要素技術の体系化に関する調査研究分科会調査研究報告書 │ 『微小機械の要素技術の体系化に関する調査研究分科会』日本機械学会 │ (共著)
205.	1992/04	Characteristics of a Silicon Monolithic Pressure-Flow Sensor for Air-Mass Flow Measurements │ 『Heat Transfer Japanese Research』21巻8号 Scripta Technica, Inc. (USA) │ ,Vol.21, No.8, pp.747-761 (共著)
206.	1992/04	Infrared Linear Image Sensor Using a Poly-Si pn Junction Diode Array │ 『Infrared Physics』33巻4号 Pregamon Press Ltd. (England),, │ ,Vol.33, No.4, pp.229-236 (共著)
207.	1992/01	Evaluation of Thin Film Material for Micromechanisms │ Journal of Robotics and Mechatronics │ ,vol.3No.1, pp.8-11 (共著)
208.	1991/12	ICプロセス法によるマイクロ圧力センサの製作 │ 「真空」日本真空協会 │ 34 (12),, pp.872-875 (共著)
209.	1991/12	シリコン圧力・流量複合センサの空気流量検出特性 │ 電気学会論文誌C │ 111-C (12),, pp.637-644 (共著)
210.	1991/05	CMOS処理回路を内蔵した32×32(1k)圧力センサアレー │ 電子情報通信学会論文誌C │ J74-CII (5),, pp.411-420 (共著)
211.	1991/05	マイクロマシーニングを用いた超小型圧力センサ │ 日本ME学会雑誌 │ 5 (11),, pp.9-14 (共著)
212.	1990/10	マイクロセンサの現状 │ 日本学術振興会極限構造電子物性第151委員会第17回研究会資料 │ ,pp.15-22 (単著)
213.	1990/08	マイクロメカニズムに用いる薄膜の評価 │ 日本ロボット学会誌 │ 8 (4),, pp.475-478 (共著)
214.	1990/07	One-Chip Integrated Pressure Sensor │ Electrical Engineering in Japan │ ,Vol.110, No.7, pp.82-91 (共著)
215.	1990/05	Tactile Image Detection Using a 1k-element Silicon Pressure Sensor Array │ Sensors and Actuators │ ,Vol.A21, pp.397-400 (共著)
216.	1990/04	Control of Internal Stress and Young's Modulus of Si<ss2>3</ss2>N<ss2>4</ss2> and Polycrystalline Silicon Thin Films Using the Ion Implantation Technique │ Applied Physics Letters │ ,Vol.56, No.14, pp.1314-1316 (共著)
217.	1990/04	イオン注入法による圧力センサ用窒化シリコン薄膜の機械的物性制御 │ 電気学会論文誌C │ 110-C (4),, pp.228-234 (共著)
218.	1990/02	センサの集積化 │ 自動車技術 │ 44 (2),, pp.84-89 (単著)
219.	1990	32×32(1k)圧力センサアレイの開発 │ 豊田中央研究所研究報告 │ ,TR-62 (共著)
220.	1990	マイクロマシーニングと圧力センサ │ センサ技術 │ 10 (04),19-23 (単著)
221.	1990	マイクロ圧力センサ │ Semiconductor World │ 9 (16) (共著)
222.	1990	ワンチップ集積化圧力センサ │ 豊田中央研究所研究報告 │ ,TR-61 (共著)
223.	1989/12	マイクロメカニカルセンサ │ 日本機械学会誌 │ 92 (853),, pp.1039-1044 (単著)
224.	1989/12	ワンチップ集積化圧力センサ │ 電気学会論文誌C │ 109-C (12),, pp.855-861 (共著)
225.	1989/11	Mechanical Property Measurements of Thin Films Using Load-Deflection of Composite Rectangular Membranes │ Sensors and Actuators, Elsevier │ ,Vol.20, pp.135-141 (共著)
226.	1989/11	静電誘導トランジスタの開発 │ 豊田織機技報 │ ,No.20, pp.2-7 (共著)
227.	1989/10	マイクロマシニングとメカニカルセンサ │ 「コンピュータ技術」コンピュータ応用技術協会 │ ,(No.90), Vol.20, No.2, pp.2-6 (単著)
228.	1989/08	薄膜の機械的物性把握がデバイス設計の鍵 │ 日経エレクトロニクス │ (480),153-155 (共著)
229.	1989/06	Evaluation of Thin Film Mechanical Properties for Micromechanisms │ Journal of The Society of Instrument and Control Engineers │ 28 (6),, pp.485-488 (共著)
230.	1989/01	知能マイクロセンサ・アクチュエータシステム │ 新技術開発事業団新技術開発懇談会セミナー, インテリジェントセンサ研究会報告書 │ ,pp.119-128 (単著)
231.	1988/11	High Temperature Operated Enhancement-Type β-SiC MOSFET │ Japan Journal Applied Physics Letter │ ,Vol.27, No.11, pp.L2143-2145 (共著)
232.	1988/09	機械量センサ │ 精密工学会誌 │ 54 (9),, pp.1641-1645 (共著)
233.	1988	触覚イメージセンサ │ センサ技術 │ 08 (03),35-39 (共著)
234.	1986/06	SiH4-N2系プラズマCVDシリコン窒化膜の性質 │ 真空、日本真空協会 │ 26 (06),268-274 (共著)
235.	1985	半導体圧力センサの開発動向 │ センサ技術 │ 5 (13),, pp.18-22 (単著)
236.	1984	集積化圧力センサ │ 電子材料、工業調査会 │ 23 (07),74-78 (共著)
237.	1983/09	Integrated Piezoresistive Pressure Sensor with Both Voltage and Frequency Output │ Sensors and Actuators │ ,Vol.4, pp.113-120 (共著)
238.	1977/08	半導体薄形ロードセル │ 非破壊検査 │ 26 (8),, pp.516-520 (共著)
239.	1976/04	拡散型半導体変換器 │ 非破壊検査 │ 25 (4),, pp.205-210 (共著)
240.	1976/02	Siのピエゾ抵抗効果の結晶異方性 │ 応用物理 │ 45 (2),, pp.179-182 (共著)
241.	1975/04	機械-電気半導体変換素子 │ 計測技術 │ 3 (5),, pp.49-55 (共著)